$4.00 - $16.00
Whisky Parts Co. Tubeless Rim Tape.
$8.00 - $50.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
Our thru-axle kit comes with everything you need to mount most 12x142 thru-axle bikes on your KICKR SNAP indoor trainer. This accessory will work with all editions of the Wahoo KICKR SNAP. It includes the following: - Threaded axle spacer M12 x 1.75 Coarse - M12 x 1.5 Medium - M12 x 1.0 Fine - End Cap
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm
- Shell: 8mm flanged axle nut - Flanged
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's 29er Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
$18.00 - $20.00
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
$11.25 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
$15.99 - $16.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Use Stan's Universal Valve Stems when you're converting standard rims to tubeless via rim tape (sold separately). They also have removable cores for easier application of tire sealant.
At the helm of taking traction, stability, speed, and stiffness to new heights stands the Roval Traverse Fattie 38 27.5 wheels. And while, yes, they feature a lightweight alloy rim and a quality build, what turns them into descending machines is the 38mm internal rim width. Let's find out why. The reason behind this is easy: Aside from the lightweight and ultra-rugged E5 alloy construction, the combination of the rim width with wider hub flanges creates an increase in plus-sized tire volume. This means that you get more suppleness in the ride quality. But not only this, the ample width also better supports the tire, so you'll experience less "burping" when riding tubeless, as well as a drastic increase in traction. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. These aren't just a one-trick pony, though. At the front hub, you'll get a 15x110mm thru-axle (end cap options included), and at the rear, the 148mm hub features DT Swiss internals for lightning-fast engagement and acceleration. And to top everything off, these wheels are hand-built to ensure the perfect tension and a long lifespan. Whether you've just picked up a new 27.5+ bike, or you're curious to try out high-volume tires, like a 2.8", on your Boost™-spaced 29er, the Traverse 38 Fattie 27.5 wheels will leave you impressed after the first spin.
Roadies all drool over carbon wheels, but the price tag often puts them out of reach. The new C 38 Disc wheels break down this barrier while bringing reliable, high performance carbon road wheels to the masses. With the C 38, we developed an all-new, lightweight, and durable carbon rim with the modern features that savvy riders demand, and then we paired it with trusty DT Swiss components, like DT 350 rear hub internals and Competition spokes, for a build that ticks all the boxes on your wish list. The new C 38s are the perfect depth (38mm), too, so they'll feel at home on everything from gravel bikes, to aero bikes, and everything in between. - Rim Type: Carbon clincher, 2Bliss Ready - Rim Material: Carbon - Braking Surface: Disc brake only - Rim Depth: 38mm - Rim Width: 21mm internal, 26.6mm external - Front Spoke Pattern: Two-cross/Radial - Rear Spoke Pattern: Two-cross/Two-cross - Spoke Count: 24 front, 24 rear - Spoke Type: DT Swiss Competition Race J-bend - Nipple Type: DT Swiss Pro Lock Brass hexagonal - Front Hub: DT Swiss 350 Disc for Roval, 100x12mm, Center Lock - Rear Hub: DT Swiss 350 Disc for Roval, 142x12mm, Center Lock, 11-speed - Assembly Method: Hand-built - Extras: Roval tubeless tape and tubeless valves - Total Wheelset Weight: 1,560g
After designing the CLX 50s, we realized that an affordable, race-worthy carbon wheelset was nowhere to be found—until the CL 50 Disc was developed, that is. We paired our quiver-killing CLX 50 Disc rim with DT Swiss Competition round spokes, our Aero Flange Disc hubs with DT Swiss 350 internals, and steel bearings to deliver you an exceptional wheelset at a more than accessible price. Why disc you ask? With our disc-specific rims, you not only ditch the brake track, but you get a stronger, more impact-resistant rim. This comes at the hands of a disc-specific carbon layup that optimizes stiffness and keeps weight as close to its rim-brake brethren as possible. And all the while, you get incredible brake modulation and power in all conditions. Sharing rims with the CLX 50s, the CL 50s feature many of the benefits as their higher-end siblings. Even though the CL 50 is similar in weight to many wheels in the “lightweight” category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CL 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. Now it was time for final testing validation. The result? A 50mm-deep, 1515-gram clincher wheelset that's race-ready and wallet-friendly. - Rim Type: Carbon clincher, 2Bliss-Ready - Rim Material: Carbon - Braking Surface: Disc brake only - Rim Depth: 50mm - Rim Width: 20.7mm internal, 29.4mm external - Front Spoke Pattern: Two-cross/Radial (2:1) - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: 21 front, 24 rear - Spoke Type: DT Swiss Competition Race T-head - Nipple Type: DT Swiss Pro LockBrass hexagonal - Front Hub: Roval AFD1, Centerlock, sealed cartridge bearings, quick-release or 12mm thru-axle end cap - Rear Hub: Roval AFD2, Centerlock, sealed cartridge bearings, DT Swiss 350 internals, 11-speed, quick-release or 142x12mm thru-axle end cap - Assembly Method: Hand-built - Extras: Roval steel quick-releases, Roval tubeless plugs and valves, Front quick-release & 12mm endcaps, Rear quick-release & 142x12 thru-axle endcaps - Total Wheelset Weight: 1,515g
It’s not often that “affordable” and “carbon” appear in the same sentence, but our Control 29 Carbon wheelset was designed to change that. Utilizing many of the same techniques used in the development of the SL iteration of the Control 29, these wheels provide the lightweight XC performance you need at a more attainable price. Creating a successful XC wheelset isn't as easy as you might think. Often times, keeping a wheel light, stiff, and strong requires an unlimited budget. So when we were asked to create a wheel that had low inertia and weight, but was also affordable, strong enough to take on rocks and roots, and wide enough to optimize traction and rolling resistance, we knew that we had our work cut out for us. We started with the notion of keeping these wheels as close to their SL brethren as possible. And with this, we explored what made the SLs so awesome in the first place, and then we implemented nearly every aspect of them. Starting with the rim, we kept our renowned Zero Hook Bead that allows for continuous fiber layup across the sidewall and rim bed. We then paired it with a wide 25-millimeter internal profile that makes it resilient to impact and creates a tire profile that’s conducive to low rolling resistance and incredible traction. On the trail, these technical traits translate to a wheelset that many XC riders have grown to love—quick accelerations on punchy climbs, swift stopping that lets you leave braking till the last second, and unprecedented reliability. Combine this with the easy to set up our 2Bliss Ready system and you have a reliable XC wheelset that’s as easy to climb on as it is to work on. To go along with the rim, we made sure to keep the lightweight, reliable, and affordable features in mind when building the wheelset, so we took DT Swiss 350 Classic hubs (15x110mm thru-axle front / 12x148mm thru-axle rear) and hand-laced them with 28 DT Swiss Competition Race spokes. Finding hand-built wheels is becoming more and more difficult, but we're fully invested in the power of the human touch. When a wheel is machine-built, there are certain margins of error that are built into the system that result in inconsistencies. With a real person building your wheels, however, you're sure to get a wheelset that's free of imperfections. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design, black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 25mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear - Spoke Type: DT Swiss Competition Race J-bend - Nipple Type: DT Swiss Alloy Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD end caps. - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, 12x148mm, includes SRAM XX1 XD freehub. - Includes 31mm OD end caps for front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1610g
The Roval SLX 24 Disc is a no nonsense wheelset. At only around 1515 grams, it's designed for light overall weight, but this doesn't mean that it sacrifices anything to strength or durability. Instead, its 20mm-wide alloy rims work to bolster the aforementioned characteristics, while also providing the optimal tire profile in order to enhance both confidence and feel on the road. Meanwhile, the rims have been built to Roval aero hubs that feature fast-engaging DT 350 star-ratchet internals at the rear. Add it all up, and you get a wheelset that checks all of the boxes for daily training and CX racing—lightweight, stiff, and incredibly reliable.
$999.99 $1,499.99 33% Off
650b wheels are notorious for their playful handling, which is why the ultra-wide design of the Roval Traverse SL Fattie 650b wheels are the perfect complement to this style of riding. The reason behind this is simple: Aside from an immaculate, lightweight, and bombproof carbon layup, with a wide, 30mm carbon rim (internal width), these wheels dramatically increase both stability and traction. Ultimately, this all boils down to more control. The extra width also allows for more tire volume, which means more suppleness in the ride quality. And not only this, but the ample width also better supports the tire, meaning that you'll experience less "burping" when riding tubeless. These wheels also include the Roval tubeless plug system, which is an easy and super lightweight solution for tubeless setups. At the front hub, you'll get a thru-axle design with 15/20mm compatibility (end cap options included), and at the rear, the hub features DT Swiss internals for lightening-fast engagement and acceleration. And to top everything off, these wheels are hand-built to ensure a painstaking attention to detail.
Our best value in Quick-release disc wheels.
Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts
$204.99 $299.99 32% Off
Aksium is a great choice for everyday road riding. With a smart balance of high-quality materials and durable construction, it shows aspiring road riders the clear performance benefits that a high-quality wheelset can make. This Aksium Disc model includes special features aimed at the unique demands of disc brake road bikes. It uses straight pull spokes for added stiffness and strength. Mavic also increased the spoke count to 24 on both front and rear wheels. With a 17mm internal width, these rims are compatible with tires up to 32mm, making them versatile, comfortable and ideal for adverse road conditions. The disc-specific hubs feature super strong QRM bearings that provide low friction and long-term durability, with no servicing needed. The Aksium Disc is made for standard quick release, and is compatible with 6-Bolt or Center Lock brake rotors.
$559.99 $799.99 30% Off
This new purpose-built wheel system is designed for reliable performance on rough roads and variable terrain. Lightweight, stiff and responsive, it features many of the same technologies as the more expensive Allroad Pro Disc model, including Mavic's new UST Road Tubeless technology. Super-wide rims (22mm internal) give you a smooth ride even on rugged roads and dirt, and you can choose either 30mm or 40mm Yksion Elite Allroad UST tubeless tires. Mavic's proven UST system lets you run lower tire pressure to improve comfort and handling with no risk of pinch flats. And with the wider rims, you can choose tires up to 40mm. The lightweight rims feature ISM 4D technology (Inter Spoke Milling), which strategically removes material from the rim where it’s not needed but keeps it around the spokes, where the tension is applied. This disc-brake specific wheelset features 24 steel spokes front and rear to distribute the brake torque efficiently and evenly. The wheels are compatible with 6-Bolt or Center Lock rotors. The front hub comes with a 12mm thru-axle and can convert to 15mm or quick release. The rear wheel is 12x142 thru-axle and can also convert to quick release.
Tiny yet powerful magnets, compatible with any bike computer, designed to efficiently fit Mavic Tracomp carbon spokes.
- UST compliant tubeless valve with removable valve core for easy sealant installation. - Mavic recommends that UST valves must be changed once a year to ensure the sealing of the UST systems. Two versions are available: - Round stem compatible with 2012 and beyond Crossmax SLR, ST and SX and 2013 Crosstrail, and: -Square stem for older wheel versions
Protect your tubes without adding bulk with these Rim Strips from FSA. They're lightweight, and come in different lengths according to wheel size. Peace-of-mind comes standard.
- Double butted 2.0/1.8/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 192g @ 32h/265mm - Box of 100 - Nipples sold separately
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
The 202 Firecrest Carbon Clincher is a stiff, lightweight and aerodynamic speed weapon ideal for every road. That's the power of Firecrest and Carbon Clincher technologies. The new 202 is the lightest entry in the Firecrest Carbon Clincher lineup, a do-it-all classic road wheel. - Firecrest rim technology affords the rider more speed, more stability, and more strength. This technology offers stable, predictable handling, and the wider rim increases lateral stiffness while offering greater vertical compliance - 77D hubset, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed - Aero performance, sprinting stiffness and light weight - Tubeless ensuring secure performance even when ridden at lower tire pressures - Max recommended rider weight 250lbs - Max tire pressure 125psi Each Wheel Includes: - Zipp Tangente Quick Release Skewer - Zipp Tubeless valve – factory installed - Tubeless rim tape – factory installed - Valve core removal tool - Zipp 77D/177D thru-axle caps to fit 12x100, 15x100 dropouts for front wheels
Page 1 of 30 Next page